Adding GPS /Compass to Cc3d revolution

[Luca]

Hey F Cs,
I think Alex made a great Guide about your Problem:

OpenPilot Revolution Flight Controller Guide

This is a quickstart guide to help you get started with the openpilot CC3D Revolution flight controller. The Revolution Board The diagram below shows all the connections on your Revolution board. You connect your ESC/motor to the right size servo pins with the signal pin being the one closest to the center of the board. On the left you have the USB connector and the R/C receiver connector. [image] Download Librepilot Since the openpilot project has had some issues with the developers so …

Luca