Hi everyone, I hope someone can help me out with this issue!
Problem:
My Flywoo V2.1 external backscreen has suddenly stopped receiving power. There’s no LED light or screen response when the Naked Camera powers on. It was working fine earlier.
Troubleshooting steps taken so far:
- I detached and reattached the ribbon cable (see picture, marked with blue arrows).
- I used a multimeter to check where power is flowing. The ribbon cable shows some readings, but the two pads next to the USB-C port show none (see picture, marked with red arrows).
Any ideas or suggestions? I’d greatly appreciate any help :))
